Flexcoil® and Flexeel®
Request Information
Strain Relief Fittings
Strain Relief Fittings are reusable and prevent kinking at the connection.
Strain Relief Fittings are reusable and prevent kinking at the connection.
Reusable Fittings
Reusable Fittings are machined from brass stock and provide the ability to easily install and uninstall as needed.
Reusable Fittings are machined from brass stock and provide the ability to easily install and uninstall as needed.
Flexeel Max®
Replacement Ends for the Flexeel Max® Hose Series
Replacement Ends for the Flexeel Max® Hose Series
Hose Splicers
Reusable Hose Splicers enable in-field repairs of Flexeel® hoses
Reusable Hose Splicers enable in-field repairs of Flexeel® hoses
Hose Nuts
Replacement Brass Hose Nuts
Replacement Brass Hose Nuts
Strain Reliefs
Replacement Strain Reliefs
Replacement Strain Reliefs
Strain Relief Fittings
Strain Relief Fittings are reusable and prevent kinking at the connection. The Brass fittings are machined from quality hex stock. The hose fits inside of the strain relief completely and offers an exceptional bend radius without the loss of flow. The strain reliefs have a brass threaded insert that is integral with the fitting, and is inserted during the molding process. This means that the insert is permanently installed and completely integrated into the assembly. These fittings are available in rigid and swivel configurations.
Note: It is recommended that swivel fittings are not installed onto straight hoses.
Note: It is recommended that swivel fittings are not installed onto straight hoses.
FEATURES
- Machined from Quality Brass Hex Stock
- Reusable, Assembled with Minimal Tools
- Made in USA
Reusable Fittings
Reusable Fittings are machined from brass stock and provide the ability to easily install and uninstall as needed. All of Coilhose Pneumatics' reusable fittings are machined from high quality brass hex stock. These fittings are available in rigid and swivel configurations.
Note: It is recommended that swivel fittings are not installed onto straight hoses.
Note: It is recommended that swivel fittings are not installed onto straight hoses.
FEATURES
- Machined from Quality Brass Hex Stock
- Reusable, Assembled with Minimal Tools
- Made in USA
Hose Splicers
Reusable Hose Splicers enable in-field repairs of Flexeel® hoses. Repair is as simple as cutting the damaged section, installing the barbed splicer, and tightening both nuts.
FEATURES
- Easily Repair Hoses with Minimal Tools
- Reusable
- Machined from Quality Brass Hex Stock
- Made in USA
Hose Nuts
Coilhose Pneumatics offers replacement brass hose nuts for Flexeel® and Flexcoil® Hoses. These hose nuts can be used on any of the Flexeel® and Flexcoil® fittings of the same size.
FEATURES
- Quality Brass Construction
- Made in USA