Solid State Automatic Drains

Solid State Automatic Drains

Solid State Automatic Drains use an electronic timer to routinely open a drain valve and evacuate built-up condensation from your compressed air system. This unit can be plumbed to drain a series of drops or even be plumbed into the bottom of a compressor tank.

Installation consists plumbing the unit into the system, and powering the unit with 110V AC electric.

Equipped with a 6 foot grounded electric cord.


  • Works with 110V AC with 60 or 50 hz
  • Cycle Time from 1 to 45 Minutes
  • Drain Time from 1 to 15 Seconds
  • Can Be Cycled Manually
  • Operating Temperature: 107°F to 120°F
Item Description Port Size Max Input Pressure
8653 Solid State Automatic Drain Valve with Timer 1/2" OD, 1/4" ID 175 psi